您好,欢迎进入bet官网365入口网站!

全国咨询热线

13751279945

bet官网365入口

PC(聚碳酸酯)EXL1330/沙伯基础(SABIC)物性表参数

责任编辑:文和林发表时间:2020-06-12

SABIC(沙伯基础创新塑料)LEXAN PC EXL1330是聚碳酸酯(PC)硅氧烷共聚物树脂,也是一种UV稳定不透明注塑(IM)和板材挤出级树脂,与标准PC相比,这种树脂具有低温(-60摄氏度)的延性、介质流动特性和优异的加工性能,并可缩短IM循环时间,LEXAN EXL1330树脂是一种通用产品,可提供广泛的不透明颜色。
PC(聚碳酸酯)EXL1330/沙伯基础(SABIC)物性表参数PDF文档下载
PC EXL1330
以下是PC(聚碳酸酯)EXL1330/沙伯基础(SABIC)物性表参数
PROPERTIES   TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1)      
UL Yellow Card Link   E45329-100079881 - -
UL Yellow Card Link 2   E45329-540671 - -
UL Recognized, 94HB Flame Class Rating   ≥0.8 mm UL 94
Glow Wire Ignitability Temperature, 3.0 mm   875 °C IEC 60695-2-13
Glow Wire Ignitability Temperature, 1.5 mm   875 °C IEC 60695-2-13
Glow Wire Ignitability Temperature, 1.0 mm   875 °C IEC 60695-2-13
Glow Wire Ignitability Temperature, 0.8 mm   875 °C IEC 60695-2-13
Glow Wire Flammability Index, 3.0 mm   960 °C IEC 60695-2-12
Glow Wire Flammability Index, 1.5 mm   960 °C IEC 60695-2-12
Glow Wire Flammability Index, 1.0 mm   960 °C IEC 60695-2-12
Glow Wire Flammability Index, 0.8 mm   850 °C IEC 60695-2-12
UV-light, water exposure/immersion   F1 - UL 746C
Oxygen Index (LOI)   35 % ISO 4589
MECHANICAL        
Tensile Stress, yld, Type I, 50 mm/min   58 MPa ASTM D 638
Tensile Stress, brk, Type I, 50 mm/min   61 MPa ASTM D 638
Tensile Strain, yld, Type I, 50 mm/min   6 % ASTM D 638
Tensile Strain, brk, Type I, 50 mm/min   130 % ASTM D 638
Tensile Modulus, 50 mm/min   2100 MPa ASTM D 638
Flexural Stress, yld, 1.3 mm/min, 50 mm span   88 MPa ASTM D 790
Flexural Modulus, 1.3 mm/min, 50 mm span   2060 MPa ASTM D 790
Tensile Stress, yield, 50 mm/min   55 MPa ISO 527
Tensile Stress, break, 50 mm/min   56 MPa ISO 527
Tensile Strain, yield, 50 mm/min   5 % ISO 527
Tensile Strain, break, 50 mm/min   >100 % ISO 527
Tensile Modulus, 1 mm/min   2100 MPa ISO 527
Flexural Stress, yield, 2 mm/min   85 MPa ISO 178
Flexural Modulus, 2 mm/min   2100 MPa ISO 178
Ball Indentation Hardness, H358/30   90 MPa ISO 2039-1
IMPACT        
Izod Impact, notched, 23°C   801 J/m ASTM D 256
Izod Impact, notched, -30°C   680 J/m ASTM D 256
Izod Impact, notched, -50°C   587 J/m ASTM D 256
Izod Impact, notched, 23°C, 6.4mm   640 J/m ASTM D 256
Izod Impact, double-gated, 23°C   1068 J/m SABIC method
Instrumented Impact Total Energy, 23°C   52 J ASTM D 3763
Izod Impact, unnotched 80*10*3 +23°C   NB kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*3 -30°C   NB kJ/m² ISO 180/1U
Izod Impact, notched 80*10*3 +23°C   70 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*3 -30°C   55 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*3 sp=62mm   75 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*3 sp=62mm   60 kJ/m² ISO 179/1eA
Charpy 23°C, Unnotch Edgew 80*10*3 sp=62mm   NB kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*3 sp=62mm   NB kJ/m² ISO 179/1eU
THERMAL        
Vicat Softening Temp, Rate B/50   143 °C ASTM D 1525
HDT, 0.45 MPa, 3.2 mm, unannealed   134 °C ASTM D 648
HDT, 1.82 MPa, 3.2mm, unannealed   120 °C ASTM D 648
HDT, 1.82 MPa, 6.4 mm, unannealed   124 °C ASTM D 648
CTE, -40°C to 40°C, flow   6.66E-05 1/°C ASTM E 831
CTE, -40°C to 40°C, xflow   6.66E-05 1/°C ASTM E 831
CTE, 23°C to 80°C, flow   7.2E-05 1/°C ISO 11359-2
CTE, 23°C to 80°C, xflow   7.2E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C   PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate B/50   143 °C ISO 306
Vicat Softening Temp, Rate B/120   145 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm   136 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm   125 °C ISO 75/Ae
Relative Temp Index, Elec 1) 125 °C UL 746B
Relative Temp Index, Mech w/impact 1) 115 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 125 °C UL 746B
PHYSICAL        
Specific Gravity   1.18 - ASTM D 792
Mold Shrinkage, flow, 3.2 mm   0.4-0.8 % SABIC method
Mold Shrinkage, xflow, 3.2 mm   0.4-0.8 % SABIC method
Melt Flow Rate, 300°C/1.2 kgf   10 g/10 min ASTM D 1238
Density   1.18 g/cm³ ISO 1183
Water Absorption, (23°C/saturated)   0.35 % ISO 62-1
Moisture Absorption (23°C / 50% RH)   0.15 % ISO 62
Melt Volume Rate, MVR at 300°C/1.2 kg   9 cm³/10 min ISO 1133
ELECTRICAL        
Comparative Tracking Index (UL) {PLC}   3 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 0   ≥0.8 mm UL 746A
High Amp Arc Ignition (HAI), PLC 0   ≥0.8 mm UL 746A
Injection Molding        
Drying Temperature   120 °C  
Drying Time   3-4 hrs  
Drying Time (Cumulative)   48 hrs  
Maximum Moisture Content   0.02 %  
Melt Temperature   295-315 °C  
Nozzle Temperature   290-310 °C  
Front - Zone 3 Temperature   295-315 °C  
Middle - Zone 2 Temperature   280-305 °C  
Rear - Zone 1 Temperature   270-295 °C  
Mold Temperature   70-95 °C  
Back Pressure   0.3-0.7 MPa  
Screw Speed   40-70 rpm  
Shot to Cylinder Size   40-60 %  
Vent Depth   0.025-0.076 mm  
Sheet Extrusion        
Drying Temperature   110-120 °C  
Drying Time   3-4 hrs  
Drying Time (Cumulative)   48 hrs  
Maximum Moisture Content   0.02 %  
Melt Temperature   245-260 °C  
Barrel - Zone 1 Temperature   250-290 °C  
Barrel - Zone 2 Temperature   245-270 °C  
Barrel - Zone 3 Temperature   225-255 °C  
Adapter Temperature   225-255 °C  
Die Temperature   240-260 °C  
Roll Stack Temp - Top   75-115 °C  
Roll Stack Temp - Middle   80-125 °C  
Roll Stack Temp - Bottom   120-145 °C

温馨提示:
本物性表参数提供者不承担任何法律责任,建议在选择材料前,就数据值与塑胶材料厂商进行验证。版权归原编辑所有,如有侵权请马上与大家联系.

为及时发现和纠正网站存在的信息内容等方面问题,在使用网站时及时反馈网站问题,从而帮助推进网站信息内容建设工作,提高网站信息互动交流
13751279945
XML 地图| Sitemap 地图